Bidirectional Breakout Board MB-03-V1

The MB-03 V1 Bidirectional Breakout Board provides a easy way to interface your cnc equipment with your parallel port on your computer.

* DESIGNED AND ASSEMBLED IN AUSTRALIA.

Features:
- Small PCB footprint 92mm(L) x 60mm(W)
- Four 4mm mounting holes (supplied with matching stand-offs)
- Single 5V dc power requirements.
- “Common” supply terminals are selectable as 0V or 5V
- Pull-up/Pull down resistors on inputs and outputs ensuring known output/input states
- Separate Pull-up/ Down voltage selectable between 0V or 5V for inputs/outpus and bi-direction pins
- Active high and Active low Enable inputs
- All inputs and outputs are buffered and capable of supplying 24mA
- Inputs can be 3.3V, or 5V logic levels
- Parallel port pins D2 - D9 can be configured as inputs or outputs via jumper
- DE-25 Female connector and IDC26 header for connection to PC/SmoothStepper.
- Designed to work with popular CNC software such as Mach3, TurboCNC, EMC2, etc.
- Designed to work with popular CNC hardware such as SmoothStepper, GeckoDrive, Rutex, etc
- 3.5mm terminal block connectors for easy installation and maintenance.

Package Contents:
- MB-03 V1 Bidirectional Breakout Board.
- 10 x 0.1” jumpers (installed).
- 4 x 4mm plastic PCB stand-offs.

User Manual
http://www.ausxmods.com.au/downloads/MB-03V1_User_Manual_R1.pdf